sales@americanriggingsd.com
1.800.40.SLING
(75464)
The Carpenter Group - Where Your SAFETY Comes FIRST
GO
Our Products
SlingsHoistsRigging HardwareChainCrane BlocksWire RopeCable RailingLifting HardwareAircraft &
Aerospace FittingsRopeCargo ControlFall ProtectionCranes



Click here
to see our new
1.2 million lb.
test machine!

ISO 9001 : 2000
All Categories > Cable Railing 
 

Cable Railing

 
Click on a Product to view details.

Search ItemsRequest Information
Invisiware® Receivers

Invisiware® Receivers

 (5)
The tensioners that are hidden inside the post.

Easy to install
Slide the Invisiware® receiver into a pre-drilled hole in the end post. The inside of the receiver is female -threaded to accept the male-threaded swaging stud (below) that is attached to the cable. The head of the receiver is broached for an Allen wrench. To tension the cable, simply insert the Allen wrench and rotate the receiver around the male threads to draw the stud and cable further inside the receiver. When installed, only the head of the Invisiware® receiver is exposed on the outside of the Post.

Use with metal or wood on level runs or stairs
Invisiware® receivers are used with pipe and with round, Square or rectangular metal tubing. ...

Adjust-A-Jaw Tensioners

Adjust-A-Jaw Tensioners

 (5)
Sleek, Stainless steel tensioners that mount on the outside of your post.

Easy to install
You can use our Invisiware® Fixed tabs or threaded tabs to mount Adjust-A-Jaw® tensioners to your end posts. or you can mount them using flat bar or angle iron welded to your post with holes drilled to accept the clevis.

The clevis has a male thread that mates with the female thread within the body of the tensioner. The swaging ferrule is swaged onto the cable and holds the cable inside the body. The body rotates on the cable and provides a considerable amount of take-up during tensioning with an open-end wrench. After tensioning, the lock nut locks the assembly in place.
Use on level runs or ...

Adjust-A-Body® with Threaded Eye Tensioner

Adjust-A-Body Tensioners

 (6)
They all work the same, only the mounting ends are different.

Easy to install
The mounting end on each of our Adjust-A-Body ® tensioners has a male thread that mates with the female thread within the body of the tensioner. The swaging ferrule is swaged onto the cable and holds the cable inside the body. The body rotates on the cable and provides a considerable amount of take-up during tensioning with an open-end wrench. After tensioning, the lock nut locks the assembly in place.

Stop-End Non-Tensioning Fittings

Stop-End Non-Tensioning Fittings

 (7)
Sleek, Stainless Steel tensioners that mount on the outside of your post.
Easy to install
Often used with our Adjust-A-Jaw ® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw ® tensioner but costs considerably less. It can be used on level runs and on stairs and severe pitches.
Samson Rope Technologies - Harrington Hoists and Cranes - Skookum Blocks & Rigging - Gunnebo Johnson Corporation - The Crosby Group, Inc. - Kulkoni - WRCA: Wire Rope Corporation of America, Incorporated - ESCO Engineered Products - GrabIQ - American Wire Rope - SLINGMAX - Memeber of AWRF
Site created by ThomasNet Web Solutions